Olympus

(multiple exposure)
Record multiple exposures in a single image, using the option currently selected for
image quality.
1 Select [Multiple Exposure] in shooting menu X (P. 111).

2 Adjust settings.
Frame Select [2f].
Auto Gain
When set to [On], the brightness of each
frame is set to 1/2 and the images are
overlaid. When set to [Off], the images
are overlaid with the original brightness
of each frame.
Overlay
When set to [On], a RAW image
recorded on a card can be overlaid with
multiple exposures and stored as a
separate image. The number of pictures
taken is one.
• a is displayed in the monitor while multiple exposure
is in effect.

3 Take pictures.
• a is displayed in green when shooting starts.
• Press D to delete the last shot.
• The previous shot is superimposed on the view through
the lens as a guide to framing the next shot.
250 F5.6
ISO
400
L N
0.0 01:02:03
P 38
HD
% Tips
• To overlay 3 or more frames: Select RAW for [K] (P. 54) and use the [Overlay] option to
make repeated multiple exposures.
• For more information on overlaying RAW images: g “Image overlay” (P. 73)
# Cautions
• The camera will not go to sleep while multiple exposure is in effect.
• Photographs taken with other cameras can not be included in a multiple exposure.
• When [Overlay] is set to [On], the images displayed when a RAW image is selected are
developed with the settings at the time of shooting.
• To set the shooting functions, cancel multiple exposure shooting first. Some functions
cannot be set.
• Multiple exposure is cancelled automatically from the first picture in the following
situations.
The camera is turned off/The q button is pressed/The MENU button is pressed/The
shooting mode is set to a mode other than P, A, S, M/The battery power runs out/Any
cable is connected to the camera
• When a RAW image is selected using [Overlay], the JPEG image for the image recorded
in JPEG+RAW is displayed.
• When shooting multiple exposures using bracketing, priority is given to multiple exposure
shooting. While the overlay image is being saved, bracketing is reset to the factory default
setting.
Multiple